Pages

Monday, December 15, 2008

Industrial Ethernet Switches




1.Managed and unmanaged rugged Ethernet switches
2.DIN-rail mountable
3.Compliant with IEC61000-6-2 EMC generic immunity standard for the industrial environment
4.Full wire-speed forwarding rate
5.Alarms for power failure by relay output (8-port only)
6.Fiberoptic interfaces





XPress-Pro SW 94000 Series
The XPress-Pro SW 94000 is a managed Ethernet switch, allowing the user to log in and create virtual LANs, configure ports, mirror ports and more. SW 94000 switches deliver the flexibility of eight 10/100 Ethernet ports with an optional fiberoptic interface. XPress-Pro SW 94000 switches can be DIN-rail, shelf or wall mounted, and come with dual redundant power inputs via a terminal block.


1. 4K MAC addresses
2. 256 KB buffer memory
3. Redundant 2A max, 10 to 30 VDC power inputs -34° to 74° C (-29° to 165° F) operating temperature range
4. Hardened aluminum case
5. Supports DIN-rail, panel, or rack-mounting installation
6. Complies with NEMA TS1 and TS2 environmental requirements for traffic control equipment
IEEE802.1w RSTP and IEEE802.1D STP compatible
7. IP multicast filtering through IGMP snooping
8. Supports port-based VLAN and IEEE802.1Q VLAN tagging and GVRP IEEE802.1p QOS classification based on port-based priority, VLAN priority field in VLAN-tagged frame, DS/TOS field in IP packet, UDP/TCP logical ports
9. 8-port-based trunking groups with up to 8 ports per group , Rate control
10. Packet filtering and port security: destination MAC and static MAC address are not subject to aging; secure mode freezes MAC address learning , Port mirroring
11. Alarms for power failure by relay output
12. UL 1604: Class 1, Division 2 classified for use in hazardous locations

No comments: